State of the Art of Dynamic Value Stream Mapping in the Manufacturing Industry
DOI:
https://doi.org/10.15282/jmmst.v6i1.7376Keywords:
Value Stream Mapping, Manufacturing Industry, Computer Simulation, Dynamic, Lean ManufacturingAbstract
Value stream mapping (VSM) is considered as an important tool in lean manufacturing that allows analysts to visualize the actual situation that happens in the production value stream. However, in high-variety and low-volume factories, conventional VSM which is more static in nature, unable to give real vision of the variability problems concerning production process. As such, the purpose of this paper is to review the role of VSM in a dynamic context which is more efficient in today`s complex and dynamic manufacturing system.This paper discusses the conventional VSM, its applications and limitations as well as how conventional VSM integrates with computer simulation to display more dynamic behavior. Both these conventional and dynamic VSM have their own benefits and drawbacks according to their applications in the manufacturing industry. As a conclusion, this paper shows that simulation applications can help to support VSM for companies that intend to transform to lean. This work is very useful for both scholars and companies to know how much an output can be produced within the predicted lead time before making physical changes to the system in order to save both money and time.
References
D. Mudgal, E. Pagone, and K. Salonitis, “Approach to Value Stream Mapping for Make-To-Order Manufacturing,” Procedia CIRP, vol. 93, pp. 826–831, 2020.
A. Lugert, K. Völker, and H. Winkler, “Dynamization of Value Stream Management by technical and managerial approach,” in Procedia CIRP, 2018, vol. 72, pp. 701–706.
J. A. Marin-Garcia, P. I. Vidal-Carreras, and J. J. Garcia-Sabater, “The role of value stream mapping in healthcare services: A scoping review,” International Journal of Environmental Research and Public Health, vol. 18, no. 3. MDPI AG, pp. 1–25, 01-Feb-2021.
D. Antonelli and D. Stadnicka, “Combining factory simulation with value stream mapping: A critical discussion,” in Procedia CIRP, 2018, vol. 67, pp. 30–35.
L. Hartmann, T. Meudt, S. Seifermann, and J. Metternich, “Value stream method 4.0: Holistic method to analyse and design value streams in the digital age,” in Procedia CIRP, 2018, vol. 78, pp. 249–254.
P. Roh, A. Kunz, and K. Wegener, “Information stream mapping: Mapping, analysing and improving the efficiency of information streams in manufacturing value streams,” CIRP J. Manuf. Sci. Technol., vol. 25, pp. 1–13, May 2019.
Z. E. Gungor and S. Evans, “Understanding the hidden cost and identifying the root causes of changeover impacts,” J. Clean. Prod., vol. 167, pp. 1138–1147, Jan. 2018.
E. T. Valencia, S. Lamouri, R. Pellerin, P. Dubois, and A. Moeuf, “Production planning in the fourth industrial revolution: A literature review,” IFAC-PapersOnLine, vol. 52, no. 13, pp. 2158–2163, Sep. 2019.
A. P. T. Pacchini, W. C. Lucato, F. Facchini, and G. Mummolo, “The degree of readiness for the implementation of Industry 4.0,” Comput. Ind., vol. 113, Dec. 2019.
T. Busert and A. Fay, “Extended value stream mapping method: Harmonizing information flows for the control of production processes,” IFAC-PapersOnLine, vol. 52, no. 13, pp. 54–59, Sep. 2019.
A. Lugert, A. Batz, and H. Winkler, “Empirical assessment of the future adequacy of value stream mapping in manufacturing industries,” J. Manuf. Technol. Manag., vol. 29, no. 5, pp. 886–906, 2018.
D. Stadnicka and P. Litwin, “Value stream mapping and system dynamics integration for manufacturing line modelling and analysis,” Int. J. Prod. Econ., vol. 208, pp. 400–411, Feb. 2019.
M. P. Roessler, I. Kleeberg, M. Kreder, J. Metternich, and K. Schuetzer, “Enhanced value stream mapping potentials and feasibility of IT support through manufacturing execution systems,” in Lecture Notes in Electrical Engineering, 2015, vol. 349, pp. 393–402.
W. Faulkner and F. Badurdeen, “Sustainable Value Stream Mapping (Sus-VSM): Methodology to visualize and assess manufacturing sustainability performance,” J. Clean. Prod., vol. 85, pp. 8–18, Dec. 2014.
F. A. Abdulmalek and J. Rajgopal, “Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study,” Int. J. Prod. Econ., vol. 107, no. 1, pp. 223–236, May 2007.
A. Deshkar, S. Kamle, J. Giri, and V. Korde, “Design and evaluation of a Lean Manufacturing framework using Value Stream Mapping (VSM) for a plastic bag manufacturing unit,” 2018.
W. Guo, P. Jiang, L. Xu, and G. Peng, “Integration of value stream mapping with DMAIC for concurrent Lean-Kaizen: A case study on an air-conditioner assembly line,” Adv. Mech. Eng., vol. 11, no. 2, Feb. 2019.
M. Jayakrishnan et al., “Digitalization Approach Through an Enterprise Architecture for Malaysia Transportation Industry,” Int. J. Civ. Eng. Technol., vol. 9, no. 13, pp. 834–839, 2018.
S. Krishnan, A. S. Dev, R. Suresh, A. Sumesh, and K. Rameshkumar, “Bottleneck identification in a tyre manufacturing plant using simulation analysis and productivity improvement,” in Materials Today: Proceedings, 2018, vol. 5, no. 11, pp. 24720–24730.
R. M. Tabanli and T. Ertay, “Value stream mapping and benefit-cost analysis application for value visibility of a pilot project on RFID investment integrated to a manual production control system - A case study,” Int. J. Adv. Manuf. Technol., vol. 66, no. 5–8, pp. 987–1002, May 2013.
R. Galan, J. Racero, I. Eguia, and J. M. Garcia, “A systematic approach for product families formation in Reconfigurable Manufacturing Systems,” Robot. Comput. Integr. Manuf., vol. 23, no. 5, pp. 489–502, Oct. 2007.
M. Braglia, M. Frosolini, and F. Zammori, “Uncertainty in value stream mapping analysis,” Int. J. Logist. Res. Appl., vol. 12, no. 6, pp. 435–453, 2009.
A. Azizi and T. a/p Manoharan, “Designing a Future Value Stream Mapping to Reduce Lead Time Using SMED-A Case Study,” Procedia Manuf., vol. 2, pp. 153–158, 2015.
M. P. Roessler, M. Wolff, and E. Abele, “Design and simulation based assessment of lean material flows considering imprecision,” in IFAC Proceedings Volumes (IFAC-PapersOnline), 2013, vol. 6, no. PART 1, pp. 559–564.
K. Venkataraman, B. V. Ramnath, V. M. Kumar, and C. Elanchezhian, “Application of Value Stream Mapping for Reduction of Cycle Time in a Machining Process,” Procedia Mater. Sci., vol. 6, pp. 1187–1196, 2014.
D. Stadnicka and D. Antonelli, “Application of value stream mapping and possibilities of manufacturing processes simulations in automotive industry,” FME Trans., vol. 43, no. 4, pp. 279–286, 2015.
W. de Paula Ferreira, F. Armellini, and L. A. De Santa-Eulalia, “Simulation in industry 4.0: A state-of-the-art review,” Comput. Ind. Eng., vol. 149, Nov. 2020.
S. Kumar, A. K. Dhingra, and B. Singh, “Kaizen selection for continuous improvement through VSM-Fuzzy-TOPSIS in Small-Scale enterprises: An Indian case study,” Adv. Fuzzy Syst., vol. 2018, 2018.
J. C. Chen, C. H. Cheng, and P. B. Huang, “Supply chain management with lean production and RFID application: A case study,” Expert Syst. Appl., vol. 40, no. 9, pp. 3389–3397, Jul. 2013.
F. A. Sultan, S. Routroy, and M. Thakur, “A simulation-based performance investigation of downstream operations in the Indian Surimi Supply Chain using environmental value stream mapping,” J. Clean. Prod., vol. 286, p. 125389, Mar. 2021.
Q. Liu and H. Yang, “Incorporating Variability in Lean Manufacturing: A Fuzzy Value Stream Mapping Approach,” Math. Probl. Eng., vol. 2020, 2020.
Q. Liu and H. Yang, “An improved value stream mapping to prioritize lean optimization scenarios using simulation and multiple-attribute decision-making method,” IEEE Access, vol. 8, pp. 204914–204930, 2020.
S. Kundgol, P. Petkar, and V. N. Gaitonde, “Implementation of value stream mapping (VSM) upgrading process and productivity in aerospace manufacturing industry,” Mater. Today Proc., Nov. 2020.
A. Gurumurthy and R. Kodali, “Design of lean manufacturing systems using value stream mapping with simulation A case study,” J. Manuf. Technol. Manag., vol. 22, no. 4, pp. 444–473, 2011.
Q. Dai, R. Zhong, G. Q. Huang, T. Qu, T. Zhang, and T. Y. Luo, “Radio frequency identification-enabled real-time manufacturing execution system: A case study in an automotive part manufacturer,” Int. J. Comput. Integr. Manuf., vol. 25, no. 1, pp. 51–65, Jan. 2012.
Y.-H. Lian and H. Van Landeghem, “An Application of Simulation and Value Stream Mapping in Lean Manufacturing.” In Proceedings 14th European Simulation Symposium, pp 1-8, 2002.
S. M. Zahraee, R. Esrafilian, R. Kardan, N. Shiwakoti, and P. Stasinopoulos, “Lean construction analysis of concrete pouring process using value stream mapping and Arena based simulation model,” in Materials Today: Proceedings, 2020, vol. 42, pp. 1279–1286.
E. Jordan, T. Berlec, L. Rihar, and J. Kusar, “Simulation of cost driven value stream mapping,” Int. J. Simul. Model., vol. 19, no. 3, pp. 458–469, 2020.
A. Suresh and A. John Sathya, “ScienceDirect Value stream mapping & Manufacturing process design for elements in an auto-ancillary unit-A case study,” 2019.
C. Tasdemir and S. Hiziroglu, “Achieving cost efficiency through increased inventory leanness: Evidences from oriented strand board (OSB) industry,” Int. J. Prod. Econ., vol. 208, pp. 412–433, Feb. 2019.
M. Lewin, S. Voigtländer, and A. Fay, “Method for process modelling and analysis with regard to the requirements of Industry 4.0 An extension of the value stream method.”
S. L. Woehrle, “Using Dynamic Value Stream Mapping And Lean Accounting Box Scores To Support Lean Implementation,” 2010.
D. Nåfors, M. Bärring, M. Estienne, B. Johansson, and M. Wahlström, “Supporting Discrete Event Simulation with 3D Laser Scanning and Value Stream Mapping: Benefits and Drawbacks,” in Procedia CIRP, 2018, vol. 72, pp. 1536–1541.
C. Koch and H. Lödding, “IFIP AICT 440 - Requirements for a Value Stream Mapping in Make-To-Order Environments,” 2014.
A. Abideen and F. B. Mohamad, “Improving the performance of a Malaysian pharmaceutical warehouse supply chain by integrating value stream mapping and discrete event simulation,” J. Model. Manag., 2020.
M. T. Amron, R. Ibrahim, and N. A. A. Bakar, “Cloud computing acceptance among public sector employees,” Telkomnika (Telecommunication Comput. Electron. Control., vol. 19, no. 1, pp. 124–133, Feb. 2021.
N. Zura Zaibidi, S. Aisyah Binti Yacob, and N. Fitrah Binti Mat Isa, “A Simulation Approach for Performance Measures of Food Manufacturing Process,” 2020.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 M. Thulasi, A.A. Faieza, A.S. Azfanizam, Z. Leman
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
