@article{Kasim_Nuawi_A. Ghani_Rizal_Ahmad_Che Haron_2019, title={Cutting tool wear progression index via signal element variance}, volume={13}, url={https://journal.ump.edu.my/jmes/article/view/1839}, DOI={10.15282/jmes.13.1.2019.17.0387}, abstractNote={<p>This paper presents a new statistical-based method of cutting tool wear progression in a milling process called Z-rotation method in association with tool wear progression. The method is a kurtosis-based that calculates the signal element variance from its mean as a measurement index. The measurement index can be implicated to determine the severity of wear. The study was conducted to strengthen the shortage in past studies notably considering signal feature extraction for the disintegration of non-deterministic signals. The Cutting force and vibration signals were measured as a tool of sensing element to study wear on the cutting tool edge at the discrete machining conditions. The monitored flank wear progression by the value of the <em><sup>R</sup>Z</em> index, which then outlined in the model data pattern concerning wear and number of samples. Throughout the experimental studies, the index shows a significant degree of nonlinearity that appears in the measured impact. For that reason, the accretion of force components by <em>Z</em>-rotation method has successfully determined the abnormality existed in the signal data for both force and vibration. It corresponds to the number of cutting specifies a strong correlation over wear evolution with the highest correlation coefficient of <em>R<sup>2</sup></em> = 0.8702 and the average value of <em>R<sup>2</sup></em> = 0.8147. The index is more sensitive towards the end of the wear stage compared to the previous methods. Thus, it can be utilised to be the alternative experimental findings for monitoring tool wear progression by using threshold values on certain cutting condition.</p>}, number={1}, journal={Journal of Mechanical Engineering and Sciences}, author={Kasim, N. A. and Nuawi, M. Z. and A. Ghani, J. and Rizal, M. and Ahmad, M. A. F. and Che Haron, C. H.}, year={2019}, month={Mar.}, pages={4596–4612} }