@article{Perez Velasquez_Avendano Rodriguez_Narvaez Tovar_Mujica Roncery_Rodríguez Baracaldo_2020, title={Fatigue Crack Growth and Fracture Toughness in a Dual Phase Steel: Effect of Increasing Martensite Volume Fraction}, volume={17}, url={https://journal.ump.edu.my/ijame/article/view/3183}, DOI={10.15282/ijame.17.3.2020.02.0606}, abstractNote={<p>Crack growth resistance in dual-phase steel was studied. The dual phase steel microstructure was modified through heat treatments to increase the martensite volume fraction from 10% to 40%. The as-received and heat-treated samples were evaluated using a uniaxial tensile test, fatigue crack growth test, and fracture toughness test. Extended Finite Element Method (XFEM) was used to simulate the crack growth in compact tension test specimens. The results showed that an increase in martensite volume fraction is an effective way to increase the fracture resistance under different load conditions, quasistatics and dynamic, increasing the fracture toughness, tensile strength and fatigue resistance of the heat-treated material. Presence of a highest content of martensite results in formation of an important number of secondary cracks during the fatigue crack growth, which slow down the crack propagation. Moreover, martensite generates a crack closure over the crack tip, making the propagation difficult due to the irregularities caused by the crack growth on the martensite. Finally, the computational load-displacement curves are in good agreement with the experimental data.  </p>}, number={3}, journal={International Journal of Automotive and Mechanical Engineering}, author={Perez Velasquez, C. and Avendano Rodriguez, D. and Narvaez Tovar, C. and Mujica Roncery, L. and Rodríguez Baracaldo, R.}, year={2020}, month={Oct.}, pages={8086–8095} }