Vol 11 - No. 3 (Sept 2017)

No	Title and Authors	Page
1	Particle swarm optimisation-based optimal photovoltaic system hourly output power dispatch using lithium-ion batteries M. A. Jusoh and M. Z. Daud DOI: https://doi.org/10.15282/jmes.11.3.2017.1.0252	2780
2	Synthesis of superabsorbent carbonaceous kenaf fibre filled polymer via inverse suspension polymerisation Munirah Ezzah Binti Tuan Zakaria, Saidatul Shima Binti Jamari and Suriati Ghazali DOI: https://doi.org/10.15282/jmes.11.3.2017.2.0253	2794
3	Investigation of optimum gating system design of fused deposition modelling pattern for sand casting S. Maidin, T. M. YI, A. Hambali1, S. Akmal, R. H. Hambali and Z. Abdullah DOI: https://doi.org/10.15282/jmes.11.3.2017.3.0254	2801
4	Interchangeable core and cavity plates for two-plate family injection mould M. A. M. Ali, N. Idayu, Z. Abdullah, M. H. A. Bakar, S. Sivarao, M. S. A. Aziz and A. Abdullah DOI: https://doi.org/10.15282/jmes.11.3.2017.4.0255	2815
5	Non-destructive tests on eco-friendly anti-corrosion paint H. M. Hajar, N. Ismail, F. Zulkifli, M.G.M. Sabri and W. B. Wan Nik DOI: https://doi.org/10.15282/jmes.11.3.2017.5.0256	2825
6	Titanium oxide with nanocoolant for heat exchanger application A. Kottasamy, K. Kadirgama, Keeran Annamalai, Mohanesan K, D. Ramasamy, M.M. Noor, M.M. Rahman and M Razali Hanipah DOI: https://doi.org/10.15282/jmes.11.3.2017.6.0257	2834
7	Study of springback pattern of non-uniform thickness section based on V-bending experiment A. F. Adnan, A. B. Abdullah and Z. Samad DOI: https://doi.org/10.15282/jmes.11.3.2017.7.0258	2845
8	Integration of maintenance and production strategies under subcontracting constraint: classification and opportunity N. Hafidi, A. El Barkany and M. Mahmoudi DOI: https://doi.org/10.15282/jmes.11.3.2017.8.0259	2857
9	Influences of the end of injection and ambient temperature on biodiesel combustion Norrizam Jaat, Amir Khalid, Mariam Basharie, Azahari Razali, Azwan Sapit and Z. Noranai DOI: https://doi.org/10.15282/jmes.11.3.2017.9.0260	2883
10	The effect of pulse welding parameters on weld geometry of boron steel using low power fibre laser K.I. Yaakob, M. Ishak and S.R.A. Idris DOI: https://doi.org/10.15282/jmes.11.3.2017.10.0261	2895
11	Capability of pipe inside an actuator to move in various fluid and oil surfaces Hiroyuki Yaguchi, Keito Murai and Keita Yaegashi DOI: https://doi.org/10.15282/jmes.11.3.2017.11.0262	2906
12	Computational fluid dynamics analysis on the course stability of a towed ship A. Fitriadhy, M.K. Aswad, N. Adlina Aldin, N. Aqilah Mansor, A.A. Bakar, and W.B. Wan Nik DOI: https://doi.org/10.15282/jmes.11.3.2017.12.0263	2919
13	Prevalence of lower limb pain and its associated factors among healthcare workers H. Mohd Yusoff, R.A. Zawawi and B.M. Deros DOI: https://doi.org/10.15282/jmes.11.3.2017.13.0264	2930
14	Numerical simulation of the performance of proton exchange membrane fuel cell with different membrane geometries Mohammed Jourdani, Hamid Mounir and Abdellatif EL Marjani DOI: https://doi.org/10.15282/jmes.11.3.2017.14.0265	2941
15	Fire severity prediction analysis of a traditional libya house roofing materials: A case study M. Mkharem, N. M. Adam, E.E. Supeni and S. Mustapha DOI: https://doi.org/10.15282/jmes.11.3.2017.15.0266	2952

Vol 11 - No. 3 (Sept 2017)

sidebar