Vol 11 - No. 1 (Mar 2017)

No	Title and Authors	Page
1	Erosive wear response of SIC_P reinforced aluminium based metal matrix composite: Effects of test environments M.M. Khan and Gajendra Dixit DOI: https://doi.org/10.15282/jmes.11.1.2017.1.0222	2401
2	Fluid-structure interaction analysis of rear spoiler vibration for energy harvesting potential Mohammad Rasidi Rasani, Mohammed Suleman Aldlemyand Zambri Harun DOI: https://doi.org/10.15282/jmes.11.1.2017.2.0223	2415
3	Fabrication of a flow channel for the production of polymer composite bipolar plates through hot compression molding M.Y M. Yusuf, M.Z. Selamat, J. Sahari, M.A.M. Daud, M.M. Tahir and H.A Hamdan DOI: https://doi.org/10.15282/jmes.11.1.2017.3.0224	2428
4	Experimental analysis of composite bolted joints using digital image correlation A. Haris, T.E. Tay and V.B.C. Tan DOI: https://doi.org/10.15282/jmes.11.1.2017.4.0225	2443
5	Experimental evaluation on the silicon mechanical performance of electronic packaging W. Fong, K.L. Koay and. I.A. Azid DOI: https://doi.org/10.15282/jmes.11.1.2017.5.0226	2456
6	Influence of mechanical properties on load sequence effect and fatigue life of aluminium alloy K.A. Zakaria, F.H.A. Suhadak M.B. Ali, S. Abdullah and M.J. Ghazali DOI: https://doi.org/10.15282/jmes.11.1.2017.6.0227	2469
7	Finite element modeling of thin intermetallic compound layer fractures Ooi Eang Pang, Ruslizam Daud, Nasrul Amri Mohd Amin, Mohd Afendi Rojan and Mohd Shukry Abd Majid DOI: https://doi.org/10.15282/jmes.11.1.2017.7.0228	2478
8	Methodology for reliability assessment of steel wire ropes under fretting fatigue conditions S. Salleh, M.A. Abdullah, M.F. Abdulhamid and M.N. Tamin DOI: https://doi.org/10.15282/jmes.11.1.2017.8.0229	2488
9	Characterisation of creep behaviour using the power law model in copper alloy M.I.M. Ahmad, J.L. Curiel Sosaand J.A. Rongong DOI: https://doi.org/10.15282/jmes.11.1.2017.9.0230	2503
10	Fatigue crack growth analysis on square prismatic with embedded cracks under tension loading M.S. Shaari, A.K. Ariffin, Akiyuki Takahashi, S. Abdullah, Masanori Kikuchi and M.R.M. Akramin DOI: https://doi.org/10.15282/jmes.11.1.2017.10.0231	2511
11	Cohesive zone modelling of Mode III delamination using the edge crack torsion test H.A. Israr, K.J. Wong and M.N. Tamin DOI: https://doi.org/10.15282/jmes.11.1.2017.11.0232	2526
12	Cutting force and chip formation in end milling operation when machining nickel-based superalloy, Hastelloy C-2000 N.H. Razak, M.M. Rahman, and K. Kadirgama DOI: https://doi.org/10.15282/jmes.11.1.2017.12.0233	2539
13	Correlation and clusterisation of traditional Malay musical instrument sound using the I-KAZ^TM statistical signal analysis M.A.F. Ahmad, M.Z. Nuawi, A.R. Bahari, A.S. Kechotand S.M. Saad DOI: https://doi.org/10.15282/jmes.11.1.2017.13.0234	2552

Vol 11 - No. 1 (Mar 2017)

sidebar