TY - JOUR AU - Nurfaizey, A. H. AU - Long, F. C. AU - M. Daud, M. A. AU - Muhammad, N. AU - Mansor, M. R. AU - Tucker, N. PY - 2019/03/29 Y2 - 2024/03/29 TI - An investigation of using grey scale image analysis for predicting the amount of deposited electrospun nanofibres JF - Journal of Mechanical Engineering and Sciences JA - J. Mech. Eng. Sci. VL - 13 IS - 1 SE - Article DO - 10.15282/jmes.13.1.2019.23.0393 UR - https://journal.ump.edu.my/jmes/article/view/1844 SP - 4679-4692 AB - <p>When electrospinning, the amount of electrospun fibres deposited is difficult to determine due to the extremely small size and light weight of the fibres.&nbsp; Several methods have been used to predict the amount of deposited fibres including weighing, imaging and direct measurement. Yet, these methods have drawbacks that make them unsuitable for commercial scale process control. In this study, an image analysis method is used to predict the amount of deposited fibres over a significant area. When images of electrospun fibres are converted into grey scale images, it is suggested that the amount of fibres deposited can be predicted by measuring the grey scale intensity. Weighing method was used to validate the image analysis results. Weighing method was found wanting when the deposition time was short (p&gt;0.05) due to the insignificant fibre masses compared to the variation of substrates. The results suggest that image analysis method could be used to predict the amount of deposited electrospun nanofibres. Test on different polymers and substrates showed that the method was still capable to distinguish the samples. The developed method has the potential to be applied as an in-line non-destructive quality control method for electrospun fibre manufacture.</p> ER -