TY - JOUR AU - Mianroodi, M. AU - Altmeyer, G. AU - Touchal, S. PY - 2019/12/30 Y2 - 2024/03/29 TI - Experimental and numerical FEM-based determinations of forming limit diagrams of St14 mild steel based on Marciniak-Kuczynski model JF - Journal of Mechanical Engineering and Sciences JA - J. Mech. Eng. Sci. VL - 13 IS - 4 SE - Article DO - 10.15282/jmes.13.4.2019.08.0464 UR - https://journal.ump.edu.my/jmes/article/view/1468 SP - 5818-5831 AB - <p>Forming Limit Diagrams (FLD) are used to design metal sheet processes and to choose appropriate material according to their formability. Development of simple and robust methods to determine the formability domain is then a major industrial issue. Marciniak-Kuczynski (M-K) plastic instability criterion is a classical and common approach used to predict numerical FLD. A convergence of the experimental conditions and theoretical M-K hypotheses is investigated. This analysis leads in the proposition of a simple experimental procedure based on classical instrumented biaxial testing machines to reproduce M-K in-plane loading conditions. Experimental results are compared with numerical simulations based on a finite element method implantation of M-K model. This versatile implementation allows the coupling of the plastic instability criterion in ABAQUS with a large range of material behaviors. Application of these experimental and numerical procedures on commercial St14 mild steel leads to the relative differences between lower experimental points and numerical forming limits predictions that do not exceed 4% and 10% in the case of uniaxial and equibiaxial tension for initial prescribed defect ratio of 0.99 and 0.95, and 22% in the case of plane tension. These procedures constitute ways easily implementable in the industry to obtain FLD at reduced costs that show good correlations between experimental results and numerical M-K predictions.</p> ER -