Volume 14 - Issue 3 | International Journal of Automotive and Mechanical Engineering

No	Title and Authors	Page
1	A review on the purification and use of biogas in compression ignition engines M. Feroskhan and Saleel Ismail DOI: https://doi.org/10.15282/ijame.14.3.2017.1.0348	4383
2	Analysis of a quarter car suspension system based on nonlinear shock absorber damping models V. M. Barethiye, G. Pohit and A. Mitra DOI: https://doi.org/10.15282/ijame.14.3.2017.2.0349	4401
3	Optimisation of gate location based on weld line in plastic injection moulding using computer-aided engineering, artificial neural network, and genetic algorithm R. Sedighi, M.Saleh Meiabadi and M. Sedighi DOI: https://doi.org/10.15282/ijame.14.3.2017.3.0350	4419
4	Investigation of thermal and hydrodynamic behaviour of Al2O3-water nanofluid through a rough parallel plate M Monjurul Ehsan, Musfequs Salehin and A K M S Islam DOI: https://doi.org/10.15282/ijame.14.3.2017.4.0351	4432
5	Empirical modelling of machining parameters for turning operations using multi-objective Taguchi method A. Saha DOI: https://doi.org/10.15282/ijame.14.3.2017.5.0352	4448
6	Safety assessment of corroded jacket platform considering decommissioning event D.K. Kim, M.A. Zalaya, M.H. Mohd, H.S. Choi and K.S. Park DOI: https://doi.org/10.15282/ijame.14.3.2017.6.0353	4462
7	Propeller shrouding influence on lift force of mini unmanned quadcopter I. Penkov and D. Aleksandrov DOI: https://doi.org/10.15282/ijame.14.3.2017.7.0354	4486
8	Hybrid electric vehicle car body drag analysis using computational fluid dynamics D. Ramasamy, K. Mohanesan, K. Kadirgama, M.M. Noor and M.M. Rahman DOI: https://doi.org/10.15282/ijame.14.3.2017.8.0355	4496
9	Characterisation and development of driving cycle for work route in Kuala Terengganu I. N. Anida, I. S. Ismail, J. S. Norbakyah, W. H. Atiq and A. R. Salisa DOI: https://doi.org/10.15282/ijame.14.3.2017.9.0356	4508
10	Investigation on TIG welding parameters of 2205 duplex stainless steel M. Ravichandran, A. Naveen Sait and U. Vignesh DOI: https://doi.org/10.15282/ijame.14.3.2017.10.0357	4518
11	Hybrid position/force control of a spatial compliant mechanism E. Shojaei Barjuei DOI: https://doi.org/10.15282/ijame.14.3.2017.11.0358	4531
12	Investigation of thermal-hydraulic performance in flat tube heat exchangers at various tube inclination angles A. Y. Adam, A. N. Oumer, Azri Alias, M. Ishak and M. M. Noor DOI: https://doi.org/10.15282/ijame.14.3.2017.12.0359	4542
13	Abrasive wear behaviour of aluminium hybrid nanocomposites produced by ultrasonication assisted casting method Poovazhagan Lakshmanan DOI: https://doi.org/10.15282/ijame.14.3.2017.13.0360	4561
14	The effect of oxygen content in soapnut biodiesel-diesel blends on performance of a diesel engine B. P. Pattanaik, J. Jena and R. D. Misra DOI: https://doi.org/10.15282/ijame.14.3.2017.14.0361	4574

Title and Authors

Page

A review on the purification and use of biogas in compression ignition engines

M. Feroskhan and Saleel Ismail

DOI: https://doi.org/10.15282/ijame.14.3.2017.1.0348

4383

Analysis of a quarter car suspension system based on nonlinear shock absorber damping models

V. M. Barethiye, G. Pohit and A. Mitra

DOI: https://doi.org/10.15282/ijame.14.3.2017.2.0349

4401

Optimisation of gate location based on weld line in plastic injection moulding using computer-aided engineering, artificial neural network, and genetic algorithm

R. Sedighi, M.Saleh Meiabadi and M. Sedighi

DOI: https://doi.org/10.15282/ijame.14.3.2017.3.0350

4419

Investigation of thermal and hydrodynamic behaviour of Al2O3-water nanofluid through a rough parallel plate

M Monjurul Ehsan, Musfequs Salehin and A K M S Islam

DOI: https://doi.org/10.15282/ijame.14.3.2017.4.0351

4432

Empirical modelling of machining parameters for turning operations using multi-objective Taguchi method

A. Saha

DOI: https://doi.org/10.15282/ijame.14.3.2017.5.0352

4448

Safety assessment of corroded jacket platform considering decommissioning event

D.K. Kim, M.A. Zalaya, M.H. Mohd, H.S. Choi and K.S. Park

DOI: https://doi.org/10.15282/ijame.14.3.2017.6.0353

4462

Propeller shrouding influence on lift force of mini unmanned quadcopter

I. Penkov and D. Aleksandrov

DOI: https://doi.org/10.15282/ijame.14.3.2017.7.0354

4486

Hybrid electric vehicle car body drag analysis using computational fluid dynamics

D. Ramasamy, K. Mohanesan, K. Kadirgama, M.M. Noor and M.M. Rahman

DOI: https://doi.org/10.15282/ijame.14.3.2017.8.0355

4496

Characterisation and development of driving cycle for work route in Kuala Terengganu

I. N. Anida, I. S. Ismail, J. S. Norbakyah, W. H. Atiq and A. R. Salisa

DOI: https://doi.org/10.15282/ijame.14.3.2017.9.0356

4508

Investigation on TIG welding parameters of 2205 duplex stainless steel

M. Ravichandran, A. Naveen Sait and U. Vignesh

DOI: https://doi.org/10.15282/ijame.14.3.2017.10.0357

4518

Hybrid position/force control of a spatial compliant mechanism

E. Shojaei Barjuei

DOI: https://doi.org/10.15282/ijame.14.3.2017.11.0358

4531

Investigation of thermal-hydraulic performance in flat tube heat exchangers at various tube inclination angles

A. Y. Adam, A. N. Oumer, Azri Alias, M. Ishak and M. M. Noor

DOI: https://doi.org/10.15282/ijame.14.3.2017.12.0359

4542

Abrasive wear behaviour of aluminium hybrid nanocomposites produced by ultrasonication assisted casting method

Poovazhagan Lakshmanan

DOI: https://doi.org/10.15282/ijame.14.3.2017.13.0360

4561

The effect of oxygen content in soapnut biodiesel-diesel blends on performance of a diesel engine

B. P. Pattanaik, J. Jena and R. D. Misra

DOI: https://doi.org/10.15282/ijame.14.3.2017.14.0361

4574

IJAME is aimed to disseminate original research in all fields of Automotive and Mechanical Engineering and presents the latest development and achievements in scientific research in Malaysia and overseas to the world’s community to stimulate and promote academic exchange between Malaysia and foreign scientists, engineers, and researchers. Original, innovative and novel contributions providing insight into the use of analytical, computational modeling as well as experimental research results are encouraged. IJAME are edited by an international board of distinguished local and foreign scientists, researchers. The objective of publishing this journal in English is to strengthen international exchange in academic research.

Indexed by: