Volume 13 - Issue 3

(December 2016)

*Click on the page number to download the paper in PDF.

No	Title and Authors	Page
1	An experimental study of the performance and emissions of spark ignition gasoline engine Adnan Kadhim Rashid, Mohd Radzi Abu Mansor, Wan Aizon Wan Ghopa, Zambri Harun, Wan Mohd Faizal Wan Mahmood DOI: https://doi.org/10.15282/ijame.13.3.2016.1.0291	3540
2	Dynamic simulation of brake pedal force effect on heavy vehicle braking distance under wet road conditions M. Zamzamzadeh, A.A. Saifizul, R. Ramli and M.F. Soong DOI: https://doi.org/10.15282/ijame.13.3.2016.2.0292	3555
3	A study on the damage evolution of P91 steel under cyclic loading at high temperature A.A. Saad, Z. Bachok and W. Sun DOI: https://doi.org/10.15282/ijame.13.3.2016.3.0293	3564
4	Correlation between vertical wheel impact energy with lateral wheel impact energy: A finite element analysis approach H. Zainuddin, M.B. Ali, N.B. Muhammad Said and K.A. Zakaria DOI: https://doi.org/10.15282/ijame.13.3.2016.4.0294	3574
5	Fatigue damage monitoring using un-supervised clustering method of acoustic emission signal on SAE 1045 steel M. Mohammad, A. Tajuddin, S. Abdullah, N. Jamaluddin and B.I.S. Murat DOI: https://doi.org/10.15282/ijame.13.3.2016.5.0295	3584
6	A numerical–experimental approach to assess emission performance of new generation engines during the cold transient Paolo Iodice and Adolfo Senatore DOI: https://doi.org/10.15282/ijame.13.3.2016.6.0296	3599
7	A mathematical model of the apparent mass of the human body under fore-and-aft whole-body vibration N. Nawayseh DOI: https://doi.org/10.15282/ijame.13.3.2016.7.0297	3613
8	Damaging fatigue cycles determination for random service loadings using mixed Weibull analysis M. Mahmud, S. Abdullah, M.F.M. Yunoh, A.K. Ariffin and Z.M. Nopiah DOI: https://doi.org/10.15282/ijame.13.3.2016.8.0298	3628
9	Evaluation of eco-design strategies for development of multiple life-cycle products T.F. Go, D.A. Wahab and H. Hishamuddin DOI: https://doi.org/10.15282/ijame.13.3.2016.9.0299	3642
10	Energy absorption capability and deformation of laminated panels for armoured vehicle materials N.A. Rahman, S. Abdullah, M.F. Abdullah, W.F.H. Zamri, M.Z. Omar and Z. Sajuri DOI: https://doi.org/10.15282/ijame.13.3.2016.10.0300	3657
11	Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite V. RamakoteswaraRao, N. Ramanaiah, M. Srinivasa Rao, M.M.M. Sarcar and G. Kartheek DOI: https://doi.org/10.15282/ijame.13.3.2016.11.0301	3669
12	Hydrogen mixture with gasoline for conventional motorcycles and effect on mass flow rate, brake thermal efficiency and emissions H. Razali, K. Sopian, S. Mat, M.R.A. Mansor and N. Amon DOI: https://doi.org/10.15282/ijame.13.3.2016.12.0302	3681
13	Pressure sores of human tissue damage during pelvic binder compression I. Munandar, S. Huzni, M.S. Ismail M.S. Shaari and A.K. Ariffin DOI: https://doi.org/10.15282/ijame.13.3.2016.13.0303	3696
14	Heat transfer performance of non-circular coiled tubes - Research summary, challenges and directions J.C. Kurnia and A.P. Sasmito DOI: https://doi.org/10.15282/ijame.13.3.2016.14.0304	3710
15	Propagation and scattering of guided waves in composite plates with defects Bibi I. S. Murat and P. Fromme DOI: https://doi.org/10.15282/ijame.13.3.2016.15.0305	3728
16	Mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles W.N.M. Jamil, M.A. Aripin, Z. Sajuri, S. Abdullah, M.Z. Omar, M.F. Abdullah and W.F.H. Zamri DOI: https://doi.org/10.15282/ijame.13.3.2016.16.0306	3742
17	Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids Girma T. Chala, Shaharin A. Sulaiman, Azuraien Japper-Jaafar, Wan Ahmad Kamil Wan Abdullah DOI: https://doi.org/10.15282/ijame.13.3.2016.17.0307	3754
18	Mechanical properties of betel nut and glass fibre reinforced hybrid polyethylene composites M. Merajul Haque and Mahbub Hasan DOI: https://doi.org/10.15282/ijame.13.3.2016.18.0308	3763
19	The effect of injection timing on the performance and emission of direct injection CI engine running on diethyl ether-diesel blends K.R. Patil and S.S. Thipse DOI: https://doi.org/10.15282/ijame.13.3.2016.19.0309	3773
20	Current trends on combustion control methods using fuel reactivities Ram Kishore Sankaralingam and T. Venugopal DOI: https://doi.org/10.15282/ijame.13.3.2016.20.0310	3788

Volume 13 - Issue 3

(December 2016)

menu